

Структура и свойства электровзрывного молибденового покрытия, полученного на титановом сплаве ВТ6
Аннотация
Ключевые слова
Литература
Chouirfa H., Bouloussa H., Migonney V., Falentin-Daudrй C. Review of titanium surface modification techniques and coatings for antibacterial applications // Acta Biomaterialia. 2019. V. 83. P. 37 - 54.
Chen Q., Thouas G. A. Metallic implant biomaterials // Materials Science and Engineering: R: Reports. 2015. V. 87. P. 1 - 57.
Kumari S., Tiyyagura H. R., Pottathara Y. B. et al. Surface functionalization of chitosan as a coating material for orthopaedic applications: A comprehensive review // Carbohydrate Polymers. 2021. V. 255. P. 117487.
Chen T., Li W., Liu D., Xiong Y., Zhu X. Effects of heat treatment on microstructure and mechanical properties of TiC/TiB composite bioinert ceramic coatings in-situ synthesized by laser cladding on Ti6Al4V // Ceramics International. 2021. V. 47. P. 755 - 768.
Emre H. E. The corrosion behaviour of as-welded and post-weld heat treated Ti6Al4V alloy in simulated body fluid // Materials Letters. 2019. V. 254. P. 162 - 166.
Alrabeah G. O., Brett P., Knowles J. C., Petridis H. The effect of metal ions released from different dental implant-abutment couples on osteoblast function and secretion of bone resorbing mediators // Journal of Dentistry. 2017. V. 66. P. 91 - 101.
Hallab N. J., Jacobs J. J. 7.8 Implant Debris: Clinical data and relevance // Comprehensive Biomaterials II. 2017. V. 7. P. 118 - 132.
Broomfield J. A., Malak T. T., Palmer A. J. et al. Volumetric peri-prosthetic osteolysis in total hip arthroplasty measured using computed tomography - A 12 year prospective double blind randomized controlled trial // Osteoarthritis and Cartilage. 2015. V. 23. P. A409 - A410.
Arcвngelo J., Guerra-Pinto F., Pinto A. et al. Peri-prosthetic bone cysts after total ankle replacement. A systematic review and meta-analysis // Foot and Ankle Surgery. 2019. V. 25. P. 96 - 105.
Rony L., Hermine P. S., Steiger V. et al. Characterization of wear debris released from alumina-on-alumina hip prostheses: Analysis of retrieved femoral heads and peri-prosthetic tissues // Micron. 2018. V. 104. P. 89 - 94.
Khadija G., Saleem A., Akhtar Z. et al. Short term exposure to titanium, aluminum and vanadium (Ti - 6Al - 4V) alloy powder drastically affects behavior and antioxidant metabolites in vital organs of male albino mice // Toxicology Reports. 2018. V. 5. P. 765 - 770.
Costa B. C., Tokuhara C. K., Rocha L. A. et al. Vanadium ionic species from degradation of Ti - 6Al - 4V metallic implants: In vitro cytotoxicity and speciation evaluation // Materials Science and Engineering: C. 2019. V. 96. P. 730 - 739.
Niinomi M. Titanium Alloys. Encyclopedia of Biomedical Engineering. Amsterdam: Elsevier, 2019. P. 213 - 224.
Li X., Chen T., Hu J. et al. Modified surface morphology of a novel Ti - 24Nb - 4Zr - 7.9Sn titanium alloy via anodic oxidation for enhanced interfacial biocompatibility and osseointegration // Colloids and Surfaces B: Biointerfaces. 2016. V. 144. P. 265 - 275.
Romanov D. A., Sosnin K. V., Gromov V. E., et al. Titanium- zirconium coatings formed on the titanium implant surface by the electroexplosive method // Materials Letters. 2019. V. 242. P. 79 - 82.
Han F., Zhu L., Liu Z., Gong L. The study of refractory Ta10W and non-refractory Ni60A coatings deposited by wire electrical explosion spraying // Surface and Coatings Technology. 2019. V. 374. P. 44 - 51.
Balla V. K., Bose S., Davies N. M., Bandyopadhyay A. Tantalum - A bioactive metal for implants // JOM. 2010. V. 62. P. 61 - 64.
Утевский Л. М. Дифракционная электронная микроскопия в металловедении. М.: Металлургия, 1973. 584 с.
Томас Г., Гориндж М. Дж. Просвечивающая электронная микроскопия материалов. М.: Наука, 1983. 320 с.
Эндрюс К., Дайсон Д., Киоун С. Электронограммы и их интерпретация. М.: Мир, 1971. 256 с.
Чернявский К. С. Стереология в металловедении. М.: Металлургия, 1977. 208 с.
DOI: https://doi.org/10.30906/mitom.2022.11.32-39
© Издательский дом «Фолиум», 1998–2025