Коррозия алюминия и его сплавов, используемых для железнодорожного подвижного состава
Аннотация
Ключевые слова
Полный текст:
PDFЛитература
Aballe A., Bethencourt M., Canoet M. J., Cano M. J. Localized alkaline corrosion of alloy AA5083 in neutral 3.5 % NaCl solution // Corrosion Science. 2001. V. 43(9). P. 1657 – 1674.
Allahar K. N., Upadhyay V. et al. Characterizing the relaxation of the open-circuit potential during an AC-DC-AC accelerated test // Corrosion. 2010. V. 66(9). P. 0950011 – 09500111.
Allahar K. N., Wang D. et al. Real time monitoring of an air force topcoat/Mg-rich primer system in b117 exposure by-embedded electrodes. 2009.
Ambat R., Davenport A. J. et al. Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminium // Corrosion Science. 2006. V. 48(11). P. 3455 – 3471.
Ambat R., Dwarakadasa E. S. The influence of PH on the corrosion of medium strength aerospace Alloy-8090, Alloy-2091 and Alloy-2014 // Corrosion Science. 1992. V. 33(5). P. 681 – 690.
Anawati, Diplas S. et al. Effect of copper on anodic activity of aluminum-lead model alloy in chloride solution // Journal of the Electrochemical Society. 2011. V. 158(5). P. C158 – C163.
Aksenov A. A., Mansurov Y. N., Ivanov D. O. et al. Mechanical alloying of secondary raw material for foam aluminum production // Metallurgist. 2017. V. 61(5 – 6). P. 475 – 484.
Rudnev V. S., Nedozorov P. M., Yarovaya et al. Local plasma and electrochemical oxygenating on the example of AMg5 (AMr5) alloy // Tsvetnye Metally. 2017. No. 1. P. 59 – 64.
Andreatta F., Terryn H. et al. Corrosion behaviour of different tempers of AA7075 aluminium alloy // Electrochimica Acta. 2004. V. 49(17 – 18). P. 2851 – 2862.
Statsenko L. G., Pugovkina O. A., Mansurov Yu. N. Influence of geometrical dimensions of non-ferrous metal inclusions on resonance properties of microwave devices // Tsvetnye Metally. 2015. V. 2015(12). P. 71 – 76.
Baer D. R., Windisch C. F. et al. Influence of Mg on the corrosion of Al // Journal of Vacuum Science & Technology a-Vacuum Surfaces and Films. 2000. V. 18(1). P. 131 – 136.
Miklushevskiy D. V., Mansurov S. Y., Piterskaya T. N., Mansurov Yu. N. Economy and innovation management of universities // Tsvetnye Metally. 2015. V. 9. P. 6 – 12.
Battocchi D., Simoes A. M. et al. Comparison of testing solutions on the protection of Al-alloys using a Mg-rich primer // Corrosion Science. 2006. V. 48(8). P. 2226 – 2240.
Mansurov Y. N., Miklin Y. A., Miklin N. A., Nikol’skii A. V. Methods and equipment for breaking down gold-containing concentrates from lean ores and mining industry waste // Metallurgist. 2018. V. 62(1 – 2). P. 169 – 175.
Birbilis N., Buchheit R. G. Electrochemical characteristics of intermetallic phases in aluminum alloys // Journal of the Electrochemical Society. 2005. V. 152(4). P. B140.
Andreeva A. A., Mansurov S. Yu., Miklushevskiy D. V., Mansurov Yu. N. Model of formation of innovation process for large industrial enterprises // Tsvetnye Metally. 2015. V. 2015(3). P. 74 – 77.
Mansurov Yu. N., Rakhmonov J. U., Letyagin N. V., Finogeyev A. S. Influence of impurity elements on the casting properties of Al – Mg based alloys // Non-ferrous Metals. 2018. V. 44(1). P. 24 – 29.
Mansurov Yu. N., Aksenov A. A., Reva V. P. Influence of the chill-mold casting process on the structure and properties of aluminum alloys with eutectic constituents // Tsvetnye Metally. 2018. V. 5. P. 77 – 81.
Blanc C., Lavelle B. et al. The role of precipitates enriched with copper on the susceptibility to pitting corrosion of the 2024 aluminium alloy // Corrosion Science. 1997. V. 39(3). P. 495 – 510.
Blin F., Koutsoukos P. et al. The corrosion inhibition mechanism of new rare earth cinnamate compounds — Electrochemical studies // Electrochimica Acta. 2007. V. 52(21). P. 6212 – 6220.
Aksenov A. A., Mansurov Yu. N., Ivanov D. O., Kadyrova D. S. Foam aluminium for small business in the far east // Tsvetnye Metally. 2017. V. 4. P. 81 – 85.
Boag A., Hughes A. E. et al. How complex is the microstructure of AA2024-T3 // Corrosion Science. 2009. V. 51(8). P. 1565 – 1568.
Bezrukikh A. I., Baranov V. N., Konstantinov I. L. et al. Modeling of casting technology of large-sized ingots from deformable aluminum alloys // International Journal of Advanced Manufacturing Technology. 2022. V. 120(1 – 2). P. 761 – 780.
Mansurov Y. N., Rakhmonov J. U. Analysis of the phase composition and the structure of aluminum alloys with increased content of impurities // Non-Ferrous Metals. 2018. V. 45(2). P. 37 – 42.
Rudnev V. S., Yarovaya T. P., Nedozorov P. M., Mansurov Y. N. Wear-resistant oxide coatings on aluminum alloy formed in borate and silicate aqueous electrolytes by plasma electrolytic oxidation // Protection of Metals and Physical Chemistry of Surfaces. 2017. V. 53(3). P. 466 – 474.
Mansurov Yu. N., Kurbatkina E. I., Buravlev I. Yu., Reva V. P. Features of structure’s formation and properties of composite aluminum alloy ingots // Non-Ferrous Metals. 2015. V. 39(2). P. 40 – 47.
Mansurov Yu. N., Reva V. P., Mansurov S. Yu., Beloborodov M. V. Economic and social basis of material science development in the far east // Tsvetnye Metally. 2016. V. 11. P. 88 – 93.
Mansurov Yu. N., Belov N. A., Sannikov A. V., Buravlev I. Yu. Optimization of composition and properties of heatresistant complex-alloyed aluminum alloy castings // Non-Ferrous Metals. 2015. V. 39(2). P. 48 – 55.
Voroshilov D. S., Motkov M. M., Sidelnikov S. B. et al. Obtaining Al – Zr – Hf wire using electromagnetic casting, combined rolling-extrusion, and drawing // International Journal of Lightweight Materials and Manufacture. 2022. V. 5(3). P. 352 – 368.
Sidelnikov S. B., Baranov V. N., Konstantinov I. L. et al. Investigation of rolling modes, structure, and properties of aluminum-magnesium alloy plates with a reduced scandium content // International Journal of Advanced Manufacturing Technology. 2022. V. 121(1 – 2). P. 1373 – 1384.
Mansurov Y. N., Kadyrova D. S., Rakhmonov J. Dependence of corrosion resistance for aluminum alloys with composition increased impurity content // Metallurgist. 2019. V. 62(11 – 12). P. 1181 – 1186.
Buchheit R. G., Martinez M. A. et al. Evidence for Cu ion formation by dissolution and dealloying the Al2CuMg intermetallic compound in rotating ring-disk collection experiments // Journal of The Electrochemical Society. 2000. V. 147(1). P. 119 – 124.
Buchheit R. G., Montes L. P. et al. The electrochemical characteristics of bulk-synthesized Al[sub 2]CuMg // Journal of the Electrochemical Society. 1999. V. 146(12). P. 4424 – 4428.
Buchheit R. G., Wall F. D. et al. Anodic dissolution-based mechanism for the rapid cracking, preexposure phenomenon demonstrated by aluminum-lithium-copper alloys // Corrosion. 1995. V. 51(6). P. 417 – 428.
Bьchler M., Watari T. et al. Investigation of the initiation of localized corrosion on aluminum alloys by using fluorescence microscopy // Corrosion Science. 2000. V. 42(9). P. 1661 – 1668.
DOI: https://doi.org/10.30906/mitom.2023.3.46-53
© Издательский дом «Фолиум», 1998–2024