Открытый доступ Открытый доступ  Ограниченный доступ Доступ для подписчиков

Влияние температуры спекания на механические свойства композитов Mg - НА

Т. Джадсон Дюрай, М. Сивапрагаш, С. Ц. Веттивел, П. Бабу Аучтхэрсон

Аннотация


Исследованы композиты Mg - HA (магний - гидроксиапатит), полученные методами порошковой металлургии и подвергнутые спеканию при трех разных температурах с последующей горячей экструзией для использования в качестве ортопедических имплантов. Измерены относительная плотность, твердость, свойства при испытаниях на растяжение и при ударном нагружении. Использованы световая и сканирующая электронная микроскопия.

Ключевые слова


металло-матричные композиты; гидроксиапатит (HA); твердость; испытания на растяжение; электронная микроскопия; metal matrix composites; hydroxyapatite (HA); hardness; tensile tests; electron microscopy

Полный текст:

PDF

Литература


Makar G. L., Kruger J. L. Corrosion of magnesium // International Materials Reviews. 1993. V. 38, No. 3. P. 138 - 153.

Staiger Mark P., Alexis M. Pietak, Jerawala Huadmai, George Dias. Magnesium and its alloys as orthopedic biomaterials: a review // Biomaterials. 2006. V. 27. Р. 1728 - 1734.

Song Guangling, Shizhe Song. A possible biodegradable magnesium implant material // Advanced Engineering Materials. 2007. V. 9, Issue 4. Р. 298 - 302.

Levesque Julie, Dominigue Dube, Michel Fiset, Diego Mantovani. Investigation of corrosion behaviour of magnesium alloy AM60B-F under pseudo-physiological conditions // Materials Science Forum. 2003. V. 426. Р. 521 - 526.

Xin Yunchang, Chenglong Liu, Xinmeng Zhang et al. Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids // Journal of Materials Research. 2007. V. 22, Issue 7. P. 2004 - 2011.

Witte Frank, Kaese V., Haferkamp H. et al. In vivo corrosion of four magnesium alloys and the associated bone response // Biomaterials. 2005. V. 26, Issue 17. P. 3557 - 3563.

Witte Frank, Jens Fischer, Jens Nellesen et al. In vitro and in vivo corrosion measurements of magnesium alloys // Biomaterials. 2006. V. 27, Issue 7. P. 1013 - 1018.

Xu Liping, Guoning Yu, Erlin Zhang et al. In vivo corrosion behavior of Mg - Mn - Zn alloy for bone implant application // Journal of Biomedical Materials Research Part A: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials. 2007. V. 83, Issue 3. Р. 703 - 711.

Liu Chenglong, Yunchang Xin, Xiubo Tian, Paul K. Chu. Degradation susceptibility of surgical magnesium alloy in artificial biological fluid containing albumin // Journal of Materials Research. 2007. V. 22, Issue 7. P. 1806 - 1814.

Hu H., Yu A., Li N., Allison J. E. Potential magnesium alloys for high temperature die cast automotive applications: A review // Mater. Manuf. Process. 2003, V. 18. P. 687 - 717. (doi: 10.1081/AMP-120024970).

Mordike B. L., Ebert T. Magnesium properties - applications - potential // Mater. Sci. Eng. A. 2001. V. 302. P. 37 - 45. (doi: 10.1016/S0921-5093(00)01351-4).

Falcon-Franco L., Rosales I., Garcнa-Villarreal S. et al. Synthesis of magnesium metallic matrix composites and the evaluation of aluminum nitride addition effect // J. Alloys Compd. 2016. V. 663. P. 407 - 412 (doi: 10.1016/j.jallcom. 2015.12.078).

Qian Ma, David H. StJohn. Grain nucleation and formation in Mg - Zr alloys // International journal of cast metals research. 2009. V. 22, Issue 1 - 4. P. 256 - 259.

Lee David B. N., Martin Roberts, Christian G. Bluchel, Ross A. Odell. Zirconium: biomedical and nephrological applications // Asaio Journal. 2010. V. 56, Issue 6. P. 550 - 556.

Witte F., Feyerabend F., Maier P. et al. Biodegradable magnesium - hydroxyapatite metal matrix composites // Biomaterials. 2007 (Elsevier DOI: 10.1016/j.biomaterials.2006. 12.027).

Ponraj N. V., Azhagurajan A., Vettivel S. C. Microstructure, consolidation and mechanical behaviour of Mg/n-TiC composite // Alex. Engg. J. 2016. V. 55. P. 2077 - 2086.

Guzman Vazquez C., Pina Barba C., Munguэa N. Stoichiometric hydroxyapatite obtained by precipitation and sol gel processes // Revista Mexicana De Fisica. V. 51, No. 3. P. 284 - 293.

Kokubo T., Kim H. M., Kawashita M. Novel bioactive materials with different mechanical properties // Biomaterials. 2003. V. 24. P. 2161 - 2175.

Krishnan M. N., Suresh S., Vettivel S. C. Characterization, formability, various stresses and failure analysis on workability of sintered Mg - 5 % B4C composite under triaxial stress state condition // Journal of Alloys and Compounds. 2018. V. 747. P. 324 - 339.

Mohamed M. Jinnah Sheik, Selvakumar N., Jeyasubramanian K., Vettivel S. C. Numerical modelling on corrosion behaviour of molybdenum-based ceramic nanocomposite coated mild steel using response surface methodology // International Journal of Surface Science and Engineering. 2013. V. 7, No. 4. P. 345 - 365.

Ponraj N. V., Azhagurajan A. Vettivel S. C., Shajan X. S. Modeling and optimization of the effect of sintering parameters on the hardness of copper/graphene nanosheet composites by response surface methodology // Metal Science and Heat Treatment. 2019. V. 60. P. 611 - 615.

Zhou J., Zhang X., Chen J. et al. High temperature characteristics of synthetic hydroxyapatite // J. Mater. Sci.: Mater. in Med. 1993. V. 4. P. 83 - 85.

Chun Chiu, Chih-Te Lu, Shih-Hsun Chen, Keng-Liang Ou. Effect of hydroxyapatite on the mechanical properties and corrosion behavior of Mg - Zn - Y alloy // Materials. 2017. V. 10. P. 855.

Wang Zhiwei, Yuhai Ma, Jie Wie et al. Effects of sintering temperature on surface morphology / microstructure, in vitro degradability, mineralization and osteoblast response to magnesium phosphate as biomedical material // Scientific Reports. 2017. V. 7, Issue 1. P. 823.

Dinaharan I., Vettivel S. C., Balakrishnan M., Akinlabi E. T. Influence of processing route on microstructure and wear resistance of fly ash reinforced AZ31 magnesium matrix composites // Journal of Magnesium and Alloys. 2019. V. 7, No. 1. P. 155 - 165.

Hassan S. F., Gupta M. Development of a novel magnesium- copper based composite with improved mechanical properties // Materials research bulletin. 2002. V. 37, Issue 2. P. 377 - 389.

Cijun Shuai, Yuanzhuo Zhou, Youwen Yang et al. Biodegradation resistance and bioactivity of hydroxyapatite enhanced Mg - Zn composites via selective laser melting // Materials. 2017. V. 10. P. 307 (doi: 10.3390/ma10030307).

Meisam K. Habibi, Min Qian. Differentiating the mechanical response of hierarchical magnesium nano-composite as a function of temperature // Mater Des. 2012. V. 42. P. 102 - 110 (doi: http://dx.doi.org/10.1016/j.matdes.2012. 05.037).

Daoud A., Abou El-Khair M. T., Abdel-Aziz M., Rohatgi P. Fabrication, microstructure and compressive behaviour of ZC63 Mg-microballoon foam composites // Compos. Sci. Technol. 2007. V. 67, No. 9. P. 1842 - 1853 (doi: https:// doi.org/10.1016/j.compscitech.2006.10.023).

Sivapragash M., Lakshminarayanan P. R., Karthikeyan R. et al. Hot deformation behaviour of ZE41A magnesium alloy // Mater. Des. 2008. V. 29. P. 860 - 866 (doi: 10.1016/j.matdes. 2007.03.014).




DOI: https://doi.org/10.30906/mitom.2020.4.44-50

© Издательский дом «Фолиум», 1998–2024