Открытый доступ
Платный доступ или доступ для подписчиков
Исследование структуры и свойств упрочненных аддитивных изделий, полученных из электроэрозионного кобальтохромового порошка
Аннотация
Ключевые слова
Литература
Song B., Dong S., Zhang B. et al. Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V // Materials & Design. 2012. V. 35. Р. 120 - 125.
Song B., Dong S., Coddet P. et al. Fabrication and microstructure characterization of selective laser melted FeAl intermetallic parts // Surface and Coatings Technology. 2012. V. 206. Р. 4704 - 4709.
Wang Z., Guana K., Gaoa M. The microstructure and mechanical properties of deposited-IN718 by selective laser melting // Journal of Alloys and Compounds. 2012. V. 513. Р. 518 - 523.
Karlsson J., Snis A., Engqvist H., Lausmaa J. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti - 6Al - 4V powder fractions // Journal of Materials Processing Technology. 2013. V. 213, No. 12. Р. 2109 - 2118.
Safdar A., Wei L. Y., Snis A., Lai Z. Evaluation of microstructural developmentin electron beam melted Ti - 6Al - 4V // Materials Characterization. 2012. V. 65. Р. 8 - 15.
Safdar A., He H. Z., Wei L. Y., Snis A. et al. Effect of process parameters settings and thickness on surface roughness of EBM produced Ti - 6Al - 4V // Rapid Prototyping Journal. 2012. V. 18, No. 5. P. 401 - 408.
Loeber L., Biamino S., Ackelid U. et al. Comparison of selective laser and electron beam melted titanium aluminides // Conference paper of 22nd International symposium "Solid freeform fabrication proceedings". University of Texas, Austin. 2011. Р. 547 - 556.
Biamino S., Penna A., Ackelid U. et al. Electron beam melting of Ti - 48Al - 2Cr - 2Nb alloy: microstructure and mechanical properties investigation // Intermetallics. 2011. V. 19. Р. 776 - 781.
Gu D. D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms // International Materials Reviews. 2012. V. 57, No. 3. Р. 133 - 164.
Konovalov S., Gromov V., Panchenko I. Fatigue-induced evolution of AISI 310S steel microstructure after electron beam treatment // Materials. 2020. V. 13, No. 20. P. 1 - 13.
Geng Y., Konovalo S. V., Chen X. Research status and application of the high-entropy and traditional alloys fabricated via the laser cladding // Progress in Physics of Metals. 2020. V. 21, No. 1. P. 26 - 45.
Nevskii S., Sarychev V., Konovalov S. et al. Wave instability on the interface coating / substrate material under heterogeneous plasma flows // Journal of Materials Research and Technology. 2020. V. 9, No. 1. P. 539 - 550.
Chen X., Liu K., Guo W. et al. The fabrication of NiTi shape memory alloy by selective laser melting: a review // Rapid Prototyping Journal. 2019. V. 25, No. 8. P. 1421 - 1432.
Konovalov S., Osintsev K., Golubeva A. et al. Surface modification of Ti-based alloy by selective laser melting of Ni-based superalloy powder // Journal of Materials Research and Technology. 2020. V. 9, No. 4. P. 8796 - 8807.
Ageev E. V., Ageeva E. V. Properties of the coatings fabricated by plasma-jet hard-facing by dispersed mechanical engineering wastes // Russian Metallurgy (Metally). 2018. V. 2018, No. 6. P. 573 - 575.
Latypov R. A., Ageev E. V., Altukhov A. Y., Ageeva E. V. Manufacture of cobalt-chromium powders by the electric discharge dispersion of wastes and their investigation // Russian metallurgy (Metally). 2018. V. 2018, No. 12. P. 1177 - 1180.
Ageev E. V., Latypov R. A. Fabrication and investigation of carbide billets from powders prepared by electroerosive dispersion of tungsten-containing wastes // Russian Journal of Non-Ferrous Metals. 2014. V. 55, No. 6. P. 577 - 580.
DOI: https://doi.org/10.30906/mitom.2021.4.42-45
© Издательский дом «Фолиум», 1998–2025