Открытый доступ Открытый доступ  Ограниченный доступ Доступ для подписчиков

Влияние содержание алюминия на микроструктуру и механические свойства высокоэнтропийных сплавов AlxCoCuNiTi

Ван Чжисинь, Чжоу Цзячэнь, Ма Минсин, Чжао ЛянЧжао

Аннотация


Исследованы пятикомпонентные высокоэнтропийные сплавы AlxCoCuNiTi при x = 0; 0,2; 0,4; 0,6; 0,8; 1,0, выплавленные в вакуумной дуговой печи. Определено влияние содержания алюминия на структуру, фазовый и химический состав сплавов, твердость по Виккерсу и коэффициент трения при испытании на изнашивание. Показано положительное влияние алюминия на структуру и износостойкость сплавов AlxCoCuNiTi.

Ключевые слова


high-entropy alloys; crystal structure; microstructure; microhardness

Полный текст:

PDF

Литература


Yeh J. W., Chen S. K., Lin S. J. et al. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes // Adv. Eng. Mater. 2004. V. 6(5). P. 299 - 303.

Wang L., Wang L., Tang Y. C. et al. Microstructure and mechanical properties of CoCrFeNiWx high entropy alloys reinforced by μ phase particles // J. Alloy. Compd. 2020. No. 155997.

Tsai M. H., Yeh J. W. High-entropy alloys: A critical review // Mater. Res. Lett. 2014. V. 2(3). P. 107 - 123.

Sha M. H., Zhang L., Zhang J. W. et al. Effects of annealing on the microstructure and wear resistance of AlCoCrFeNiTi0.5 high-entropy alloy coating prepared by laser cladding // Rare. Metal. Mat. Eng. 2017. V. 46(5). P. 1237 - 1240.

Senkov O. N., Miller J. D., Miracle D. B. et al. Accelerated exploration of multi-principal element alloys with solid solution phases // Nat. Commun. 2015. V. 6. P. 6529.

Ding Q., Zhang Y., Chen X. et al. Tuning element distribution, structure and properties by composition in high-entropy alloys // Nature. 2019. V. 574(7777). P. 223 - 227.

He J. Y., Liu W. H., Wang H. et al. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system // Acta Mater. V. 62. 2014. P. 105 - 113.

Gwalani B., Gorsse S., Choudhuri D. et al. Tensile yield strength of a single bulk Al0.3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa // Scripta Mater. 2018. V. 162. P. 18 - 23.

Gwalani B., Soni V., Lee M. et al. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy // Mater & Design. 2017. V. 121. P. 254 - 260.

Xu Z. Q., Ma Z. L., Wang M. et al. Design of novel low-density refractory high entropy alloys for high-temperature applications // Mater. Sci. Eng. A. 2019. V. 755. P. 318 - 322.

Rao Z., Wang X., Wang Q. et al. Microstructure, mechanical properties, and oxidation behavior of AlxCr0.4CuFe0.4MnNi high entropy alloys // Adv. Eng. Mater. 2017. V. 19(5). P. 1600726.

Shi Y., Yang B., Liaw P. K. Corrosion-resistant high-entropy alloys: A review // Metals. 2017. V. 7(2). P. 43.

Rao J. C., Diao H. Y., Ocelнk V. et al. Secondary phases in AlxCoCrFeNi high-entropy alloys: An in-situ TEM heating study and thermodynamic appraisal // Acta Mater. 2017. V. 131. P. 206 - 220.

He J. Y., Liu W. H., Wang H. et al. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system // Acta Mater. 2014. V. 62. P. 105 - 113.

Elkatatny S., Gepreel M. A. H., Hamada A. et al. Effect of Al content and cold rolling on the microstructure and mechanical properties of Al5Cr12Fe35Mn28Ni20 high-entropy alloy // Mater. Sci. Eng. A. 2019. No. 759 (Jun. 24). P. 380 - 390.

Wang W. R., Wang W. L., Wang S. C. et al. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys // Intermetallics. 2012. V. 26. P. 44 - 51.

Heo Y. U., Takeguchi M., Furuya K. et al. Transformation of DO24 η-Ni3Ti phase to face-centered cubic austenite during isothermal aging of an Fe - Ni - Ti alloy // Acta Mater. 2009. V. 57(4). P. 1176 - 1187.

Tong C. J., Chen Y. L., Chen S. K. et al. Microstructure characterization AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements // Metall. Mater. Trans. A. 2005. V. 36(4). P. 881 - 893.

Tsai M. H., Yeh J. W. High-entropy alloys: a critical review // Mater. Res. Lett. 2014. V. 2(3). P. 107 - 123.

Zhang S., Wu C. L., Yi J. Z. et al. Synthesis and characterization of FeCoCrAlCu high-entropy alloy coating by laser surface alloying // Surf. Coat. Tech. 2015. V. 262. P. 64 - 69.

Yeh J. W., Chen S. K., Lin S. J. et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes // Adv. Eng. Mater. 2004. V. 6(5). P. 299 - 303.

Yeh J. W., Chen Y. L., Lin S. J. et al. High-entropy alloys - a new era of exploitation. Materials Science Forum // Trans. Tech. Public. Ltd. 2007. V. 560. P. 1 - 9.

Inoue A. Stabilization of Metallic supercooled liquid and bulk amorphous alloys // Acta Mater. 2000. V. 48. P. 279 - 306.

Murty B. S., Yeh J. W., Ranganathan S. et al. High-Entropy Alloys. Elsevier. 2019.




DOI: https://doi.org/10.30906/mitom.2021.6.8-13

© Издательский дом «Фолиум», 1998–2024