Открытый доступ Открытый доступ  Ограниченный доступ Доступ для подписчиков

Влияние армирования керамическими микрочастицами на структуру и свойства композитов с алюминиевой матрицей

Мохаммад Хамза, Субрата Мондал

Аннотация


Исследовано влияние армирования керамическими микрочастицами SiC, B4C и Al2O3 на микроструктуру и механические свойства композитных материалов с алюминиевой матрицей, полученных порошковой металлургией. Установлено, что увеличение концентрации армирующих частиц приводит к существенному росту прочности при сжатии и твердости композитов при незначительном повышении плотности. Показана связь морфологии микроструктуры со свойствами композитов.

Ключевые слова


металломатричные композиты; керамические микрочастицы; микроструктура; морфология; прочность на сжатие; твердость

Полный текст:

PDF

Литература


Kapatel P. M. Investigation of green composite: Preparation and characterization of alkali-treated jute fabric-reinforced polymer matrix composites //j. Nat. Fibers. 2021. V. 18, Is. 4. P. 510 - 519.

Gong T., Yao P., Xiong X., et al. Microstructure and tribological behavior of interfaces in Cu - SiO2 and Cu - Cr metal matrix composites //j. Alloys Compd. 2019. V. 786. P. 975 - 985.

Shi Y., Neubrand A., Koch D. Characterization of hardness and stiffness of ceramic matrix composites through instrumented indentation test // Adv. Eng. Mat. 2019. V. 21, Is. 5. Art No. 1800806.

Megahed M., Attia M. A., Abdelhameed M., El-Shafei A. G. Tribological characterization of hybrid metal matrix composites processed by powder metallurgy // Acta Metall. Sin.-Engl. Lett. 2017. V. 30, Is. 8. P. 781 - 790.

Ranganath G., Sharma S. C., Krishna M., Muruli M. S. A study of mechanical properties and fractography of ZA-27/titanium-dioxide metal matrix composites //j. Mater. Eng. Perform. 2002. V. 11, Is. 4. P. 408 - 413.

Kumar J., Mondal S. Microstructure and properties of graphite-reinforced copper matrix composites //j. Braz. Soc. Mech. Sci. 2018. V. 40, Is. 4. Art. No. Unsp 196.

Munisamy B., Madhavan V. R. B., Chinnadurai E., Janardhanan J. Prediction of mechanical properties of Al6061 metal matrix composites reinforced with zircon sand and boron carbide // Mater. Test. 2019. V. 61, Is. 6. P. 537 - 542.

Larianovsky N., Popov V., Katz-Demyanetz A. et al. Production of Al metal matrix composites reinforced with carbon nanotubes by two-stage melt-based HPDC-CE method //j. Eng. Mater. Technol. 2019. V. 141, Is. 1. Art No. 011002.

Sharma S., Kumar P., Chandra R. Mechanical and thermal properties of graphene-carbon nanotube-reinforced metal matrix composites: A molecular dynamics study //j.Compos. Mater. 2017. V. 51, Is. 23. P. 3299 - 3313.

Alem S. A. A., Latifi R., Angizi S. et al. Microwave sintering of ceramic reinforced metal matrix composites and their properties: a review // Mater. Manuf. Process. 2020. V. 35, Is. 3. P. 303 - 327.

Kumar V. M., Venkatesh C. V. A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites // Mater. Res. Express. 2019. V. 6, Is. 7. Art. No. 072001.

Kumar M. S., Begum S. R., Vasumathi M. Influence of stir casting parameters on particle distribution in metal matrix composites using stir casting process // Mater. Res. Express. 2019. V. 6, Is. 10. Art No. 1065d4.

Ramakrishnan A., Dinda G. P. Functionally graded metal matrix composite of Haynes 282 and SiC fabricated by laser metal deposition // Mater. Des. 2019. V. 179. Art. No. Unsp. 107877.

Sokolov Yu. A., Pavlushin N. V., Kondrat'ev S. Yu. New additive technologies based on ion beams // Russ. Eng. Res. 2016. V. 36, Is. 12. P. 1012 - 1016.

Rudskoi A. I., Kondrat'ev S. Yu., Sokolov Yu. A., Kopaev V. N. Simulation of the layer-by-layer synthesis of articles with an electron beam // Tech. Phys. 2015. V. 60, Is. 11. P. 1663 - 1669.

Liu X., Wang Q., Kondrat'ev S. Yu. et al. Microstructural, mechanical, and damping properties of a Cu-based shape memory alloy refined by an in situ LaB6/Al inoculant // Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 2019. V. 50, Is. 5. P. 2310 - 2321.

Acuna R., Abreu C. M., Cristobal M. J. et al. Electrochemical study of the surface metal matrix composite developed on AA 2024-T351 by the friction stir process // Corros. Eng. Sci. Technol. 2019. V. 54, Is. 8. P. 715 - 725.

Zawrah M. F., Hassab-Allah I. M., Ata M. H., Shouib H. Effect of Si, Al2O3, and aluminum dross on sinterability and properties of Ni - Ti metal matrix composites prepared by powder metallurgy // Mater. Res. Express. 2019. V. 6, Is. 9. Art. No. 096588.

Rudskoy A. I., Kondrat'ev S. Yu., Sokolov Yu. A. New approach to synthesis of powder and composite materials by electron beam. Part 1. Technological features of the process // Met. Sci. Heat Treat. 2016. V. 58, Is. 1 - 2. P. 27 - 32.

Kondrat'ev S. Yu., Sokolov Yu. A. New approach to electron beam synthesis of powder and composite materials. Part 2. Practical results for alloy VT6 // Met. Sci. Heat Treat. 2016. V. 58, Is. 3 - 4. P. 165 - 169.

Prajapati P. K., Chaira D. Fabrication and characterization of Cu - B4C metal matrix composite by powder metallurgy: Effect of B4C on microstructure, mechanical properties and electrical conductivity // Trans. Indian Inst. Met. 2019. V. 72, Is. 3. P. 673 - 684.

Bodukuri A. K., Eswaraiah K., Rajendar K., Sampath V. Fabrication of Al - SiC - B4C metal matrix composite by powder metallurgy technique and evaluating mechanical properties // Perspect. Sci. 2016. V. 8. P. 428 - 431.

Jang J. H., Han K. S. Fabrication of graphite nanofibers reinforced metal matrix composites by powder metallurgy and their mechanical and physical characteristics //j.Compos. Mater. 2007. V. 41, Is. 12. P. 1431 - 1443.

Subramaniam B., Natarajan B., Kaliyaperumal B., Chelladurai S. J. S. Wear behaviour of aluminium 7075-boron carbide-coconut shell fly ash reinforced hybrid metal matrix composites // Mater. Res. Express. 2019. V. 6, Is. 10. Art. No. 1065d3.

Chaudhry M. A., Ali L., Ghauri K. M., Iqbal J. Development and characterization of nanoparticle metal matrix composites: (Al 2024-SiC np) // Mater. Res. Express. 2019. V. 6, Is. 9. Art. No. 095032.

Varshney D., Kumar K. Application and use of different aluminium alloys with respect to workability, strength and welding parameter optimization // Ain Shams Eng. J. 2021. V. 12, Is. 1. P. 1143 - 1152.

Kumar G. B. V., Panigrahy P. P., Suresh N. et al. Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites // Compos. Pt. B-Eng. 2019. V. 175. Art. No. Unsp. 107138.

Venkatesh R., Srinivas S. Effect of heat treatment on hardness, tensile strength and microstructure of hot and cold forged Al6061 metal matrix composites reinforced with silicon carbide particles // Mater. Res. Express. 2019. V. 6, Is. 10. Art. No. 106563.

Roseline S., Paramasivam V. Corrosion behaviour of heat treated Aluminium Metal Matrix composites reinforced with Fused Zirconia Alumina 40 //j. Alloys Compd. 2019. V. 799. P. 205 - 215.

Shorowordi K. M., Laoui T., Haseeb A. S. M. A. et al. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study //j. Mater. Process. Technol. 2003. V. 142, Is. 3. P. 738 - 743.

Mahesh Kumar V., Venkatesh C. V. Effect of ceramic reinforcement on mechanical properties of aluminum matrix composites produced by stir casting process // Mater. Today: Proc. 2018. V. 5, Is. 1. Pt. 3. P. 2466 - 2473.




DOI: https://doi.org/10.30906/mitom.2022.3.30-33

© Издательский дом «Фолиум», 1998–2024